12-25-2022 12:43 PM - last edited on 12-26-2022 09:41 AM by Arthur
I have a Pixma 922 printer which has worked well for a while. Now it is printing off to the left with no border on that
side. The settings have been rechecked and 'centered' has been chosen and not changed for years. Where do I go from here? I am on a Windows 10 OS using LRC and PS.
12-27-2022 10:51 AM
You can try completely removing the printer from your computer and then reinstall it. After the reinstall, restart your computer and try to print again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
12-27-2022 11:51 AM
I will try this pronto and let you know.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.