12-26-2022 04:27 PM - last edited on 12-27-2022 09:40 AM by Danny
My computer was compromised and after fixing this issue, the connection with my Canon MX330 was not working, with error message: "printer in error state" How do I make the connection again between computer/printer. Help
12-26-2022 06:55 PM
Welcome to the Forum!
While our Forum Community members are welcome to chime in, the PIXMA MX330 has been retired. That means we do not offer support for the printer or updated drivers.
If you're unable to resolve the issue, we welcome you to speak with a Canon Upgrade Program specialist to help you score an updated replacement that would meet your current needs at a discount. Reach them weekdays and Saturdays at 1-866-443-8002.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.