12-07-2019 09:05 PM - last edited on 11-23-2022 09:37 AM by Danny
My Pixma 6821 uses the 270 / 271 series ink cartridges.
I have error code 1413. The cartridge is a NEW Canon wider black ink cartridge.
Is there another way to address this issue.
Cartridges are expensive to have bought & then not be able to use!
A tech at Best Buy, where I got it and went to get a new black 270 cartridge today
said "take a clean cloth and rub the contacts where the cartridge is inserted
as some dust or grit there may interefere with the connection." I tried this several
times but it still won't 'recognize' the new black 270 cartridge!
contact me at [Removed personal information per forum guidelines], please.
12-09-2019 03:30 PM
It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
11-22-2022 04:33 PM
Thanks for being active in our community! We're happy to share that it's possible to scan with an empty ink tank or cartridge. To start scanning, follow the instructions at this link.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.