02-19-2023
01:15 PM
- last edited on
02-21-2023
10:09 AM
by
Danny
Just bought an MG 2522. On trying to complete initial start up, the orange (yellow?) light flashes as soon as I turn printer on. There is no tape or support/restrain items remaining which would need to be removed. Soon as I hit the "on" button the green light and orange/yellow light flashes. Need help!
02-21-2023 01:56 PM
hi,
The orange light will blink for a certain number of flashes and then pause briefly before flashing again. After the pause, could you count the number of flashes. This will help us narrow down the error code your printer is experiencing.
We look forward to your reply.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.