01-13-2023 02:27 PM - last edited on 01-14-2023 09:16 AM by Danny
I've had this printer for 9 months. It started printing color badly. Ink levels are strong. I found the solution to do an ink flush -- I've done that. Still same problems.
Mostly now what is happening is I select "print" for a color PDF; the printer activates. It starts printing a little bit. But then it stays on "printing" for a prolonged period of time. I end up canceling after 30 minutes or so.
Prior to this week, it would have printed perfectly and been done in a minute.
01-17-2023 12:27 PM
Hi,
If nozzle cleanings dont resolve the issue and you have to keep performing a ink flush, I recommend reaching out to Canon support for your warranty options. You will need to register your Canon gear HERE to access additional support options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.