11-11-2022 11:10 PM - last edited on 11-12-2022 08:06 AM by Danny
I have PIXMA 6020 megatank and the print head has been problematic. Cyan got clogged right after purchase and I needed to flush the print head manually using a flushing kit. It got fixed and worked fine for several more months (but used only few times), but then photo color started to be very strange as if some color is not correctly coming out. I deep cleaned and I flushed again, this time all colors pretty deeply. The strange color ratio was fixed but the printed photos are so faint. I thought the flushing liquid thinnered the ink inside the print head, but this faint issue still is going on after more than 10 photo printings. Any solution ?
Should I replace the print head ? Is it CH-21R ? It's so hard to verify. Appreciate your help !
11-12-2022 07:06 AM
Your printer has a 1 yr warranty. Best option would be to contact Canon.
Bay Area - CA
~R5 C (184.108.40.206) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.