01-05-2021 07:26 PM
I have a PIXEMA G6020 connected via WiFi. We have several PCs connected to the home network that use the printer. Ink levels are about 80+ or higher.
Issue:
Regardless of the computer being used, when a print job is sent to the printer its display says "Printing" but nothing happens. If I press the power button to turn it off the display says, "Ending. Please wait momentarily." but does not turn off. When I unplug the printer for 60 seconds, replug it in, and turn it on, then the printer prints the job and the display says "Printing" and never goes back to an idle state. I have to unplug it or wait till it goes to sleep to get it back to an idle state. Then if I send a new print job the issue starts all over.
Per some other posts I have tried the following to fix the problem:
Nothing seems to fix the problem permanently. What are the next steps?
Thanks!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.