08-22-2016 07:19 AM - edited 08-23-2016 06:39 AM
I'm using Easy photo print EX 4.5.0. on an IP7200. I need to print the same label 50 times. Recently I would press "print" then put the disc in when I got the 2nd message (in picture below). Often I would do this last step and it would look like it's going to print but would just send back the blank disc. Then I would press print and again have to press the "start printing". Not sure what caused that but would like to avoid it in the future. Mostly though I look for the way requiring the least amount of clicking for multiple discs. Thanks for any tips.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.