Search your computer for IJ Network Scanner Selector EX, and make sure scanner is selected, then select ok. Even if it's ALREADY SELECTED, select ok. (If you don't know how to search for it, most likely it's at OS C : Program Files (x86) >Canon > IJ Network Scanner Selection EX > CNMNSST) Now at the printer, push the Scan button, then "Save/Forward" (located in lower left corner of the little screen on the printer), hit the "ok"button (not by the little screen but on the printer itself, the one in the center of all the arrows). So you've said OK to the "Forward scanned data to a PC" prompt, now use the arrow to select your PC. Hit ok. You shouldn't have to go through that again unless it acts up again. In general you'll just push the "start" button (which looks like a diamond with a line in it), either the green for color, or white for black & white scan. If you're scanning from something placed on the platen, you'll have to select the button by "end" that appears in the little screen. If you're feeding through the top, it will conclude you're done when all papers have gone through. Your scan should save to your documents folder under IMG_date. This may be too rudimentary an explanation for what you need but this question comes up a lot so just going through the steps.
