11-21-2022 02:17 PM
Have done one deep cleaning and problem still exsist.
11-21-2022 04:11 PM - edited 11-21-2022 04:13 PM
Greetings,
Old ink, a worn out or partially clogged printhead (due to infrequent use) can all cause the problems you are describing. Have you performed a printhead alignment?
Also, a dirty timing (encoder) strip is something else you can look at.
Have you checked this:
Canon Knowledge Base - Clean the timing (encoder) strip - MX922
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
11-21-2022 04:17 PM
Thanks I’ll try that
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.