cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX882 freezeup

mackworth
Apprentice

My MX882, after sitting for a while, will always freeze up, so that when I go to print, it doesn't respond, and all the buttons are dead. To add insult to injury, after pulling the plug and restarting it (apparently my only options), after starting up, it then chastises me for not having properly shut it down.

 

Any suggestions?  

3 REPLIES 3

Ramona
Authority

Hi mackworth,

 

If you have the printer plugged into a surge protector, please try plugging the printer directly into a wall outlet to see if this will resolve the issue.  If you still experience difficulty, please call or email us using one of the methods on the Contact Us page for further assistance.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi, Ramona; thanks for the response. No, it's plugged directly into the wall. I should add that I've noticed that the buttons do turn on the panel lights, they just don't do anything else.

Hi mackworth,

 

The printer may require servicing to resolve the issue it is experiencing; we ask that you please call or email us using one of the methods on the Contact Us page for further assistance.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!