06-27-2019 01:44 PM
Need a driver for my MX 860 Multifunction Printer for macOS 10.14.5 but all sources indicate no such exists. Canon site says this OS is not supported for this printer. Am I out of luck? -Bill
Solved! Go to Solution.
07-01-2019 03:33 PM
Hi BillRandall,
The PIXMA MX860 is not supported with macOS v10.14. At this time, there are no plans to develop drivers for that version of OS X.
07-01-2019 03:33 PM
Hi BillRandall,
The PIXMA MX860 is not supported with macOS v10.14. At this time, there are no plans to develop drivers for that version of OS X.
07-02-2019 09:19 PM
I fully accept this as the solution but I can't find any "Accept as Solution" button! Anyway, thanks. -Bill
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.