09-06-2013 10:03 PM
I can't get my ms 495 pixma printer to print. The error displays E O 3 and screen displays "paper jam". I see nothing in the paper area. I've re-powered and even turned upside-down and was successful from what I read online. This happened suddenly. I've had no previous problems.
Thanks
09-06-2013 10:12 PM
Hello, pattykay!
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, please contact our support group over the phone at 1-800-OK-CANON for additional assistance.
09-06-2013 11:17 PM
Didn't work. 😞
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.