cancel
Showing results for 
Search instead for 
Did you mean: 

MG7520 -- Unchanged missing sections even after the deep cleaning

billking1984
Apprentice

The nozzle check patten looks good, but always miss the same areas in all printing jobs.

 

Please help advise. Thank you! 

 

IMG_20190729_134828.jpg

IMG_20190729_135142.JPG

3 REPLIES 3

Michael
Product Expert
Product Expert

Hello,

 

Make sure that the paper is completely flat when loading it into the printer.  If the paper is not wrinkled before printing and the issue persists, try cleaning the timing strip to see if this will help.  Click THIS LINK for details.

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thank you so much for following up with my question!
The issue is still there after I cleaned the transparent timing strip, and did another deep cleaning. 
 
I tried different print jobs, and found this issue (missing section/gap) only happens in black/white color area. All other colors in a combined color print jobs are good. Does it mean I'd better to do something else only for the black head? 
 
Thanks, 
Bill 

Hi billking1984,

 

Because cleaning the encoder did not clear this issue, your PIXMA MG7520 would require service. You are eligible for Canon's Upgrade Program.  This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system.  This option allows you a one-time opportunity to purchase a replacement product, discounted from the list price.

 

To help you get up and running quickly, we also offer free standard shipping (if the order is completed by 12:30PM ET).  If you would like to take part in this option, please call our Sales Department at (866) 443-8002 seven days a week, 8am to Midnight.  Let them know you have been working with technical support and the Canon Upgrade Program was offered.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM