cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MG5320 error message "Printer head is incorrect"

Murphma
Apprentice
I just installed a new cannon print head and the same error message is coming up even after replacing with a brand new print head and unplugging for more than 15 minutes... This seams to be a built-in defect with so many people having the same issue... In order for new printers to be purchased. I have barely used this printer at all and there should be no reason this is occurring, especially with a new printhead in place. There must be a fix for this problem... Is it an update issue??? I still have a ton of ink for this printer and it would be a waste of money to have to purchase a new one and waste All this ink, literally 8 boxes of black large and small, magenta, blue and yellow... HELP!!!
1 REPLY 1

Ramona
Authority

Hi Murphma,

 

Since you continue to receive the print head error even after replacing the print head, we recommend having the unit looked at by a service facility to determine the exact cause and resolution to the error.  Please call or email us using one of the methods on the Contact Us page for information on service facilities and other options available to you.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!