cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Head Cleaning - MX922

Oldmaven
Contributor

Instructions on the Web for print-head cleaning say to press the Menu key, then select Setup, then select Maintenance.  On my MX922, though, the Menu shows no Setup option.  I have Photo, Template Print, Web service, and WLAN setup.

 

How do I reach Setup or Maintenance?

1 ACCEPTED SOLUTION

Patrick
Product Expert
Product Expert

Hi Oldmaven,

 

Please follow these steps to perform a cleaning:

 

1.  Please press the MENU button on your PIXMA MX922

 

2.  Use the down arrow key until the wrench and screwdriver icon is selected, then press OK 

 

3.  Select Maintenance then press OK 

 

4.  Select Cleaning and press OK

 

5.  Select Yes and press OK  Figure: LCD

 

 

The cleaning will begin.

 

https://ugp01.c-ij.com/ij/webmanual/Manual/W/MX920%20series/EN/BG/Bg-Maintenance1400.html

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

5 REPLIES 5

Patrick
Product Expert
Product Expert

Hi Oldmaven,

 

Please follow these steps to perform a cleaning:

 

1.  Please press the MENU button on your PIXMA MX922

 

2.  Use the down arrow key until the wrench and screwdriver icon is selected, then press OK 

 

3.  Select Maintenance then press OK 

 

4.  Select Cleaning and press OK

 

5.  Select Yes and press OK  Figure: LCD

 

 

The cleaning will begin.

 

https://ugp01.c-ij.com/ij/webmanual/Manual/W/MX920%20series/EN/BG/Bg-Maintenance1400.html

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

When I press "Menu" and then press the down arrow to go to the tools icon--nothing happens. What can I do? 

Try using the left or right arrows and see if that will move you to the screen with the tools icon.

Thanks so much..Still no luck after trying the other arrows. The subjects in the viewscreen to the right of the Menu button are Photo, Template print, Web service, and WLAN setup. The photo icon is surrounded by a rectangullar border that is yellow. The reason I want to clean the head is to see if it fixes my printed photos that are coming out too light all of a sudden. Thanks again.

There should be more options besides those four that you see on screen. (Either to the right or the left of that screen). Try pressing those arrow keys even when it looks like you're as far over as you can go and see if you can find the maintenance icon (Tools). 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.