10-08-2013 05:07 PM
I have been trying to print some coupons as I've done for years and I have been getting the message "Support Code 1007" on the printer screen and saying the upper cassette is empty. Solution "Load paper". Well duh. But even if I add paper I do not want it to print from the upper tray as I am not printing photos. I am printing coupons so I'm assuming the printer thinks it's printing photos since the coupons have a small picture of the item on each one. Any way to make the lower tray the default for this? I called customer support and the rep wasn't very helpful and said he had the same trouble on his end and then proceeded to tell me "Do some research and see if you can find a solution. Sorry I couldn't help you. Have a nice day!" Some help he was. Anyone know a way around this? Never had a problem with my previous Canon printer which recently died so I bought this one and am beginning to hate it.
07-05-2017 06:00 AM
Hi dkparm27,
To resolve this issue, please follow these steps:
1. Remove the cassette from your PIXMA MG5422.
2. Remove the paper from the cassette and restack it. Place the paper back in the cassette.
3. Align the paper guides with the edges of the paper.
4. Check the page size setting on your PIXMA MG5422 and make sure it matches the paper size in the cassette.
5. Press OK.
Once set, please attempt to print.
If the issue continues, resetting your PIXMA MG5422 may resolve this issue. To do this, please follow these steps:
1. On your PIXMA MG5420, select Setup from the Home screen.
2. Select Device Settings and press the OK button.
3. Use the up or down button to select Reset setting and press the OK button.
4. Use the up or down button to select Reset all and press the OK button.
Once reset, please attempt to print.
If you continue to have difficulties, please contact our support group using the following link:
http://Canon.us/ContactLI
07-02-2014 05:55 PM
I'm also a couponer and am having this same problem. It printed out the first 2 jobs, no problem. But when I switched to another computer to print more, I started getting this message. Did you ever come across a resolution?
11-10-2014 01:01 AM
I too had same problem but found a workaround. This printer has 2 trays, lower tray for letter & A4 size. Upper tray for up to 5x7 photo paper. The information sent to the printer from the websites or email attachments is telling it to print from the upper tray. One workaround is, save the page or attachment as PDF and then try to print from the pdf document. It worked for me this way.
11-17-2014 03:22 AM
I too am having the same problem. I cannot print from my iMac or Macbook Air if I'm connected through wifi. If I connect using a printer to USB cable, the printer prints correctly. I haven't had any problems printing except for coupons.
03-21-2015 10:36 PM
02-20-2015 11:26 AM
02-24-2015 07:54 PM
I get this weather printing wirelessly from an iMac running OS X 10.10.2 or from an ipad. My printer is essentially dead. Any help would be appreciated.
02-24-2015 08:01 PM
If I turn the printer off and on again (which takes like 5 minutes) one page will print so it's not that I selected a photo paper size by mistake. There's something wrong with the printer that it can't pick up the paper. Is there anything in the paper path that needs regular cleaning?
03-10-2015 02:06 PM
same problem. I can print wireless from my macDesktop but not from my Laptop. Installed new drivers, same problems. Continue to get support code 1007.
03-21-2015 10:36 PM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.