08-04-2025 12:09 PM
My line feed makes noise. Every 5 or 6 lines of print, it goes "clack" when it feeds a line up to print on the current page. And in between pages, the noise is four clacks, "clack,clack,clack,clack" as it ejects the current sheet. Always the same pattern, no variations
What could i have done wrong or forgotten to do on installation?
08-04-2025 01:26 PM
Hey there!
Take a look at this link: https://canon.us/g6020setup there's a little "video" that shows you where all of the packing tape and other bits and bobs are that need to be removed. It'll also walk you through the rest of the steps and verify everything is good to go. It'll even reinstall the software for you (or install it for the first time).
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.