08-16-2015 06:39 AM
03-28-2021 12:39 PM - edited 03-28-2021 12:40 PM
I have this exact same problem. Worked 2 months ago but haven't used since and has been plugged in whole time. Now just the power light is on and the light against 4" x 6" Photo Paper. If I unplug and plug back in I just get the same. If I open the front the cartridge mechanism doesn't shift either - its just dead.
03-28-2021 12:52 PM
I found this in another post and it worked:
"Plug the power line in while holding the RESET button (RED triangle, also called STOP button)). Release the RESET button. The ALARM starts blinking. Push the "ON" button."
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.