cancel
Showing results for 
Search instead for 
Did you mean: 

CP900 printer can't print multiple picutres using the software

marilynlacey
Apprentice

I have a canon selphy cp 900 printer I can not get it to print 4 pictures on one sheet of paper using the software that came with my printer.  It will only print one picuture and it wont' allow me to pick more picutres of the same one it's wasting my paper.  I want to pirnt mutiple of the same picture like I can if i'm using the printer with out the software.  I saw someone on you tube with the canon cp800 doing it.  why can't I I need help please.  Also I had some pictures scaned at walgreens to a cp put them in my computer and then added them to a USB stick put they wont display on my selphy printer why not.  and I can't print them with the software unless I print the 1 4x6 which I want more than one of the same picture on the 4x6 sheet which is why I got the printer.  I'm using the kp108in paper.  im fustrasted trying to make it work.  I have a project I',m trying to finish and this is holding me up.  I can print 4 on one sheet from my camera card but I need to print from my computer as well I have lots of picture on my computer I want to use and all the pictures are in jpeg.

2 REPLIES 2

Michael
Product Expert
Product Expert

Hello marilynlacey.

 

If you are attempting to print multiple copies of the same picture, an option to select the number of prints will be available in the "Simple Print" menu of the SELPHY Photo Print program.

 

If you are attempting to print multiple copies of an image on the same sheet, please use the "Layout Print" menu in SELPHY Photo Print.

 

For your USB flash drive, please try moving the JPEG images to the main directory of the drive.   Images in subfolders may not be read properly.  If you continue to have issues, you may have to use a different USB memory drive, or transfer the images to your computer to print from the SELPHY Photo Print program.


This didn't answer your question or issue? Find more help at Contact Us.

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have the same problem with my selphy CP800.

i cannot see the "Layout Print" .

 

there're three options in the Print Menu : Simple Print, Decoration Print, and Calender Print.

 

i cannot find the "Layout Print" in those three options, even in the Setting menu.

 

i elclose some screenshots of the menu.

 

pls help me to make multiple images on one sheet (e.g. 4cm x 6 cm photos, etc)

 

thank youcanon1.jpgcanon2.jpg

Announcements
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM