11-17-2012 11:40 AM
11-19-2012 12:35 PM
Hello ruszub.
If you are looking to reset the settings to factory defaults, please perform the following:
1. Go to the Home menu or press the Home button on the printer.
2. Use the up or down arrow keys until Setup appears, then press the softkey under Setup.
3. Select Device Settings and press OK.
4. Select Reset Setting and press OK.
5. Select Reset All and press OK.
6. Select Yes and press OK.
Once this has been done, the current settings will be cleared.
This didn't answer your question or issue? Find more help at Contact Us.
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
EOS R6 Mark II - Version 1.2.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.