10-05-2017 09:44 PM
I'm getting horizontal banding on my b&w prints - especially noticeable in the black areas. I have already done about 5 nozzel checks and cleaning and 1 deep clean. Also switched the black carts. Those actions improved it a little but still can see slight banding in the blacks. Any additional actions I have not thought of would be appeciated.
Using a PIXMA ip8720 with 3rd party inks (the PGI-250 XL is pigment) and CANON Premium Matte paper 13x19. Also using the 'plain paper'/GRAYSCALE setting to eliminate all traces of color tints. I know the PGI-250 XL/'plain paper setting is normally used to print text but this is the only setting I'm using that does not produce green/magenta/cyan color tints on b&w prints. The prints are high contrast and a tad harsh but I like that look for what I'm printing right now.
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.