Hi again!
The firmware is specific to the camera, not the computer from which you load it. However there is a separate software for those computer types because they compress the firmware file differently. So, if you choose either, depending on the computer you choose to use to do the update from, once done it makes no difference to the camera.
If you download the compressed file you will see a PDF with instructions. That said, especially with Macs, wireless is fairly notorious for being unreliable. If you have a USB card reader in either of your computers, do the following:
Open the link to download the compressed file to a folder on your computer hard disc
Expand it out (windows) and you will see a file with a .FIR extension.
copy that file to the root directory of your SD card
Put the SD card into your R7, turn it on and go to the wrench menu, last page, there you will find the firmware option
Select that and the camera will read the card, looking for the FIR file. When found it will ask you if you want to load it and you say yes.
NOTE: make sure the battery is fully charged and don't touch the camera until the update has been completed.
cheers, TREVOR
The mark of good photographer is less what they hold in their hand, it's more what they hold in their head;
"All the variety, all the charm, all the beauty of life is made up of light and shadow", Leo Tolstoy;
"Skill in photography is acquired by practice and not by purchase" Percy W. Harris
