cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Quick Preview - how to rotate?

nerdswithknives
Apprentice

We have a Canon 6D Mark I which we use for food photography. We often mount the camera on an arm facing straight down onto a table. We use EOS Utility 3 on a Mac (10.14). 

 

Recently, somehow a setting has been activated where the main preview window is correctly aligned (eg portrait aspect ratio) but the quick preview is rotated from that window 90 degrees. It makes it very difficult to get an accurate assessment of the preview. We have tried turning on "Auto rotate' in the software settings, but nothing changes.

 

DOes anyone have any ideas?

 

Thanks!

 

Matt

1 ACCEPTED SOLUTION

Hi William

 

Thank you for the reply. I double-checked my settings and they are as you recommend. I also cleared the camera settings just in case. This did not do the trick for me, unforunately.

 

I then found the tiny triangular button just to the top right of the shutter button in the software. This did rotate the preview image. 

 

Can you explain a little more about this feature? Is it purely to rotate the preview image, or does it have a similar function to the other "rotate" features in the software? 

View solution in original post

3 REPLIES 3

William_N
Enthusiast

Hello nerdswithknives,

 

Welcome to the Canon Forums and thanks for your post!

 

In this situation I recommend making sure that the Auto rotate feature on the camera is set to ON(camera/computer), and that the Auto rotate button in the Remote Shooting Live View window is off (gray not blue).

 

The last thing to check is that the Rotate Image option, in the Remote Shooting tab of the Preferences menu in EOS Utility, is checked. You will need to open the Preferences menu of EOS Utility first by clicking the Preferences button, select the Remote Shooting tab, and then make sure the Rotate Image setting has a checkmark.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

 

Hi William

 

Thank you for the reply. I double-checked my settings and they are as you recommend. I also cleared the camera settings just in case. This did not do the trick for me, unforunately.

 

I then found the tiny triangular button just to the top right of the shutter button in the software. This did rotate the preview image. 

 

Can you explain a little more about this feature? Is it purely to rotate the preview image, or does it have a similar function to the other "rotate" features in the software? 

Hey there,

This would be similar to the rotation function inside the camera where it will save the orientation within metadata so as long as the program you are viewing the image in can read that part of the metadata it should maintain that correction.

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!