01-30-2023 10:20 AM
My entire home wireless network was losing Wi-Fi signal speed. After troubleshooting it was determined that my Windows 10 computer was causing the problem. When the computer was turned off, the Wi-Fi signal strength returned. Further troubleshooting determined that the cause of the problem was Canon's EOS Utility which was automatically starting when the computer booted. Once the utility was removed from automatic start-up, the Wi-Fi signal strength returned. I don't know what this utility does that would be causing me to lose wireless signal strength, but I'm certain that it was the culprit. Any thoughts on this would be appreciated. For now, I have stopped this utility from running on my Windows 10 computer.
01-30-2023 10:02 PM
I can't guess why you're having this problem, but an easy solution is to not use WiFi. WiFi adds complication that seems to cause hassles for people. Connecting the camera to the computer via USB cable is lots more reliable.
And if you are using EOS Utility JUST to transfer files to the computer (which is what it will want to do by default after you install it), you don't need EU or any other program. The camera appears as a drive on the computer, which you can open and find photo files and copy/move them by hand. Or, put the memory card in a USB card reader plugged into the computer.
02-01-2023 04:18 AM - edited 02-01-2023 10:36 PM
Losing WiFi signal when using the EOS Utility on a Canon camera can be a common issue. This problem is often caused by interference from other WiFi devices or other electronic devices in the environment. To resolve this issue, the user can try the following steps:
Change the channel: Some WiFi networks may be set to a channel that interferes with other networks. The user can change the channel of their network to a different one.
Update the firmware: The camera's firmware may need to be updated to ensure compatibility with the latest version of the EOS Utility. Dinar Guru
Disable other WiFi devices: The user can turn off other WiFi devices in the area to reduce interference.
Move the camera closer to the router: The user can move the camera closer to the router to improve the signal strength.
Reset the camera's WiFi settings: The user can reset the camera's WiFi settings to the default values and reconfigure the network connection.
If these steps do not resolve the issue, the user should contact Canon technical support for further assistance.
02-01-2023 05:08 AM
How are you measuring the strength of your Wi-Fi signal?
It sounds very odd for local WAP to lose signal strength because a Wi-Fi connected device has open an application that is able to use Wi-Fi, even though the app is not actively using Wi-Fi.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.