11-14-2012 02:28 AM
Hi to all,
I have a problem with the Eos Utility Software.
I have the OS Windows 8, and I installed the last version of EOS Uility 2.12 compatibility with the new OS.
When I connect my EOS 5D MKIII or the 7D the EOS Utility not recognized the camera.
The drivers are installed , all the others programs works fine with the cameras.
Someone have a suggestion ?
Solved! Go to Solution.
11-01-2013 12:11 AM
Here is what worked for me: New 5D MkIII, Windows 7 64bit, fresh download of EOS utiltity. Kept getting message "EOS Utility has stopped working".
I got it to work by right clicking on the desktop icon, selecting "Run as administrator..."
For what it's worth
BobW
11-05-2013 05:59 PM
I didn't have any problem with my EOS Utitily until update Window 8 to 8-1. I've tried to uninstall driver and EOS Utility still won't recognize my Canon 60D as it was before update window.
11-07-2013 12:29 AM
HI
I've also updated to 8.1 and now im back to square 1 - eos wont recognise the camera
Argghhhh
11-26-2013 09:53 PM
I had the latest version working on 8.1 for several days, several. I was setting up remote shots with the camera control.
All of a sudden the software wont even boot.
Reports back,
EOS utility has stopped working!
Uninstalled it reinstalled it. Nuthin!
i was thinking of purchasing a new laptop, but 80% of the reason was to run this software with my camera for remote shots.
Now im hesitant.
11-26-2013 10:04 PM - edited 11-26-2013 10:34 PM
Ok, i fixed my problem. The EOS Utility update killed my program. I must of updated it after the several days i was running it.
Windows 8.1 32. Original disk install version and im up and running.
11-26-2013 11:46 PM
I recently update EOS Utility to version 2.13.25 updater for Windows. After that every thing was back to normal again.
12-27-2013 01:57 PM
I have windows 7 and a rebel xt and I can no longer down load photos, I see this has been an on going problem, yet the last response from Cannon has been over a year. Has anyone been able to fix this issue.
12-27-2013 04:01 PM - edited 12-27-2013 04:03 PM
I got it working again with my EOS 400D under Windows 8.1 (x64)!!!!!!!!!!!
- I just reïnstalled my computer with Windows 8.1 x64.
- Then I installed Canon EOS Utility with the CDRom that came with the camera.
(which didn't work and only displayed the error: "can't find the camera")
- Then I updated Canon EOS Utility to the newest version there is for the EOS 400D (verion 2.9.0.0).
(This one didn't work either. I had to download .Net Framework 3.5 but no camera was detected)
- Then I updated Canon EOS Utility to the newest version there is to download (v2.13.40).
And this version worked with me....
Finally
12-29-2013 10:50 AM
lehr,
There are no drivers for Windows 7 to work with the EOS Rebel XT. The best way to download the images is using a card reader.
Alternatively, you can also try connecting the camera in the PTP communication mode. To do this:
This connection mode will only allow you to use the built-in Windows software at best, but we cannot guarantee it will be successful.
This didn't answer your question? Find more help at Contact Us.
12-30-2013 08:51 AM
Mike,
If I buy a card reader it will work like it did prior to getting windows 7 ? What I find really strange is that my laptop always had windows 7 and it worked before !
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.