01-29-2024 07:19 AM - last edited on 01-30-2024 08:58 AM by Danny
Hi!
Is it possible for EOS utility to remote capture two cameras at the same time? Looking to set up a photo activation with 2 canon r6 mkii using a wireless remote (burst shots) but have them call tether transfer right to one pc.
Is this possible? Or will I need 2 pcs?
01-31-2024 06:10 PM
Greetings studiozphotoboo,
For remote shooting with the EOS Utility software application, only one camera can be connected and controlled at any given time. A secondary computer would be needed if you are to shoot remotely with two cameras at the same time. Please keep in mind that the second computer will have to be manually operated, similar to the primary computer when using the software.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.