01-26-2021 07:46 AM
I have a complicated setup... i need to output from the XA15 SDI output and the HDMI output at the same time.
I can do this, but only when I step down the XA15 output to 720p. At 1080i output, my computer (which receives the hdmi output) won't see the 1080i output. That would be fine, except I really need to be sending a 1080i signal to the sdi output.
So... what i think i need is an hdmi to usb adaptor that will convert the signal to something my computer can read. Does anyone have any experience with this?
Is it that my computer can't accept a 1080i signal (i've tried to do this on a mac and a pc and it can't be seen at 1080i).
Is it my capture card? I'm currently using an IOGEAR HDMI to USB C Video Capture Card. Is there a caputre card that will make the conversion.
01-26-2021 01:43 PM
01-30-2021 08:48 AM
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.