02-10-2018 01:54 PM
I've had my camcorder for a couple months, but I haven't used it very heavily and there are no scratches/dents anywhere. Recently, I have discovered that when I try to record, the time stamp indicator thingy says "00:00" and doesn't go up. I have a Lexar 633X 128 GB memory card. It has been my only card and has recorded perfectly in the past. After the problem emerged I put all my remaining videos on my computer and wiped the memory. The problem persisted even though I had over 16 hours of available recording space. I also wiped any grime off the SD card and the card slot, so I believe it is something wih the camera.
p.s. Once I dropped it from about 2 feet off the ground, it still recorded afterwards, though.
02-13-2018 06:51 AM
Have you tried re-formatting the card in the camcorder? If you re-formatted using your computer this would cause problems.
02-14-2018 03:23 PM
Thank you for posting.
Your camcorder is not designed to accept memory cards using the UHS-I, UHS-II or UHS-III standards. Some such cards will have "UHS-I, UHS-II or UHS-III on them. Others will have a "1", "2" or "3" superimposed on a "U". While some of them are backwards-compatible, not all will work.
I recommmed checking with Lexar, for backward compatibility with the Speed Class 10 memory card standard.
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.