01-08-2018 06:57 AM
I have a HF R800 mainly to record lectures, I also have a regular external mic,
when i plug in the mic, it stops to record audio, if I unplug the mic then the machine does record audio
also the mic works on other machines
01-08-2018 08:55 AM
I am also experiencing the external mic issue. I purchased a TRRS lapel mic, but apparently the external mic port is a TRS port. I then purchased a TRRS to TRS adapter, but that was a waste of money since the expernal mic still didn't work. I just received a TRS lapel mic but that doesn't work either.
I do have a TRS external Takstar SGC 598 mic and tested that on the Canon. The Takstar mic works. So my conclusion is that the external mic port on the camera is a TRS plug and apparently you must purchase a mic that is battery powered. The Quick Guide that comes with the camera explains nothing about the external mic requirements. I cannot find any simple instructions as to which type of external mic is required with the HF R8000 camera.
01-08-2018 08:01 PM - edited 01-08-2018 08:02 PM
I have the VIXIA HF R600 and my external Rode Mic does not work as well. When I plug it in there is no sound recording and it does not show levels. If I slightly pull the jack out I get visual mic levels but it records audio faint in the background and with a lot of static. I purchased this camera within the last year but this is the first time I have tried to use the external mic. The microphone works wth a USB adapter so I know it is not the Mic.
Please advise Canon.
01-10-2018 12:38 AM
Thanks for posting.
Your camcorder will accept just about any microphone with a 3.5mm stereo plug. Because of the wide variety of microphones, we don't have specific recommendation for a brand or model of microphone, nor do we offer support for third-party accessories such as this.
Microphones should meet the following specifications: 3.5 mm stereo minijack -64 dBV (with 600 Ohms microphone)/5 kohm or more. Because this camcorder cannot provide "phantom" power for the microphone, an "active" microphone (requiring external power) must supply its own power.
01-11-2018 01:11 PM
I've had the same problem with two different third party mics via Amazon, and a Sony. The question I have is not just powered or not, but does this require TRS (3 pole), or TRRS (4 pole)? The documentation doesn't say, and it's not helpful because there isn't a "standard" 3.5 mm stereo plug.
TRS - Tip, ring, sleeve - so 3 pole
TRRS - Tip, ring, ring, sleve - ergo 4 pole
Or does the R800 accept both styles?
01-22-2018 11:46 PM
Yes, I'm having the same problem. I purchased the Vixia HF R800 and I've returned it twice for failure of the mic jack. The third one doesn't work either. I've tried 2 unpowered/ passive mics that I've used on other camers, computers, and cellphones. With the Vixia I just get static unless I pull the jack out just the right amount then I get static and a tiny bit of intended sound. This appears to be a serious design flaw if three out of three are bad. I'm very dissapointed, I kind of expected more from Canon. The external mic jack is a requirement for me. Could you please fix and inform your valued customers when it is taken care of?
01-23-2018 11:12 AM
I found a mic that works. 4 pole, TRRS powered. Go to Amazon and look for lavalier vixia R800. I would copy the link in here but can't get to it on my tablet.
01-25-2018 06:33 AM - last edited on 01-25-2018 08:45 AM by Danny
Did you use it for a HF R800?
[link removed per forum guidelines]
01-25-2018 07:09 AM
Yes. The Lav mic in the amazon.com link does work with the HF R800's external mic port. No static or any other type of interference.
02-18-2018 10:20 PM
I have this camera. Before I bought it, I confirmed with Canon that it will not power a microphone such as the Rode VideoMicro or other non-battery operated mics.
I use the Takstar SGC-598 with my R800. You can find it for less then $35 on Amazon. It works perfectly with my HF R800.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.