03-01-2023 09:34 PM - last edited on 03-02-2023 08:48 AM by Danny
I need to upload a video to my Mac Pro (ventura 13.2.1) and when i plug in the USB cord it says connected but nothing will upload. When I press play on the video the screen usually goes dark.
03-02-2023 08:09 AM
Are you using iMovie, Final Cut Pro or some other video editor? If so, can that software see that the camera is connected an be able to import the footage?
What I have done for all my video work over recent years (from Vixia camcorders like the HF G20 through the EOS C70) is use a card reader instead.
To clarify, do you have a Mac Pro (tower) or a MacBook Pro (laptop)? Many MacBook Pros would have built-in SD card readers.
03-02-2023 08:41 AM - edited 03-02-2023 08:44 AM
If it does not appear as a disk, you might need Canon's software, or go the external hard drive route.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.