cancel
Showing results for 
Search instead for 
Did you mean: 

Canon Vixia HF R500 "memory card cover is open"

jocino
Apprentice

not sure why i'm getting this error message. i have tried different cards, all the same.

i am unable to record ANYthing because of this... $500 camcorder won't record!!

 

i understand this may be caused because of something to do with the door for where the memory card goes - but this IS  closed and even if i squeeze it closed tight to possibly trigger a sensor, still same error.

 

where do we go from here?

 

please.. and thank you

3 REPLIES 3

Tim
Authority

jocino, 

We are sorry to hear this issue occurs.  We recommend sending the unit in for service.  You may fill out an online repair request form at the following link to setup your repair using our online service.

www.usa.canon.com/repair

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

absolutely not

even the link you sent is faulty

 

and obviously i need to get it repaired - was hoping somebody had an option other than spending another $100 or so for something that seems completely ridculous.

 

(this is a screenshot of the link you provided for some reason):

 

Capture2345.JPG

The link seems to be working now. Please give it a try again from a different internet browser or another device.  

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x