07-09-2019 03:42 AM
07-09-2019 04:42 PM
Hello rhini,
Welcome to the Canon Forums and thanks for your post!
For this type of behavior I recommend performing a complete reset on the camera to see how it responds. To do this I would make sure it is powered off and detach the battery.
Next, use a pointed object to press and hold the reset button for 5 seconds. The reset button is located near the hinge of the LCD above the SD card slot. After 5 seconds release the button, and re-attach the battery. Finally, power the camera on and see how it is operating.
If the issue continues please contact our friendly Technical Support team via phone at 1-800-828-4040, M-F 9AM - 9PM EST, for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.