Canon Community

Rkeroack · 09-24-2025

I am using an R7 camera and 600EX-RT flashes at a few indoor occasions. Exposure is very inconsistent, where one shot will be perfect, then a few minutes later, shots will look like the flash had little to no effect, even though it went off. This ha...

Rkeroack · 09-26-2024

I have tried several times to use my R7 with two or three 600EX-RT flashes. One flash on camera works fine. A second or third as slaves always results in an under-exposed image, as if the on-camera flash is cutting power if it "sees" the other flas...

Rkeroack · 09-25-2025

Yes, I knew about the group settings; master on camera was A, slave was B. I did have the slave on ETTL as well, so I'll have to try that as well as all manual on the camera. I had tried Program and Aperture priority, but by the time the poor shots...

Rkeroack · 09-25-2025

ISO I believe was 800, no Auto ISO. Lens was a RF70-200 2.8 or a EF 24-70 w/adaptor. I do not have the camera with me, but I believe the flash setting in the camera is the default setting, flash controll is ETTL. It was set as a master, as I had a...

Rkeroack · 09-30-2024

OK, that explains alot! I will try that out at home before the next event. Thanks for your help!

Rkeroack · 09-28-2024

Thanks for the info, I do not have the second flash here at the moment. I’ll have to check this. The only odd thing is in the past with my 7D2, I could have multi flashes set up all on the same group and they worked just fine. The on camera flash w...

Canon Community

User Statistics

User Activity

Inconsistent flash exposure with 600EX-RT

Multi flash use with EOS R7 and 600 ex-RT flashes

Re: Inconsistent flash exposure with 600EX-RT

Re: Inconsistent flash exposure with 600EX-RT

Re: Multi flash use with R7 and 600 ex-RT flashes

Re: Multi flash use with R7 and 600 ex-RT flashes