cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Speedlite 580EX II EOS R8 Compatibility

RichardinIdaho
Apprentice

I have a Speedlite 580EXII and am planing on ordering a new Canon R8 camera. Will my flash work with the new camera or do I need to replace it with a newer model?

Thanks

1 ACCEPTED SOLUTION

Actually this is NOT CORRECT. Canon introduced E-TTL II in 2004 with the EOS 1D Mark II. The 580EX II was released in 2008. So this speedlite already supports it. Also E-TTL II is implemented in the camera body not the speedlite. So the speedlite is already compatible. Along with ALL of Canon's EX or EL speedlites. Also Canon's documentation of the 580EX II also states the speedlite supports E-TTL II. The speedlite is also FULLY compatible with the external speedlite control menu. The IR AF Assist Beam IS NOT COMPATIBLE with ANY mirrorless camera. The speedlite will fire an Intermittent AF Assist Beam/ (Intermittent Flashes) instead. The AD-E1 adapter is required for the 580EX II because the speedlite has weather sealing other speedlites WITHOUT weather sealing don't require it. 

Screenshot 2023-02-11 145630.png

Screenshot 2022-12-10 193859 CC.png

Screenshot 2023-02-11 154035.png

EOS R Series Intermittent Flash AF Assist Beam.png

 

-Demetrius

Current Gear: EOS 5D Mark IV, EF 16-35mm F/2.8L III USM, EF 24-70mm F/2.8L II USM, EF 50 F/1.8 STM, EF 85mm F/1.8 USM, EF 70-200mm F/2.8L IS III USM, 470EX-AI & 600EX II-RT

Retired Gear: EOS 40D & Sigma 17-50mm F/2.8 EX DC OS HSM

-Demetrius
Bodies: EOS 5D Mark IV
Lenses: EF Trinity, EF 85mm F/1.8 USM
Retired Gear: EOS 40D, EF 50mm F/1.8 STM & EF 70-210mm F/4
Speedlites: 420EX, 470EX-AI, 550EX & 600EX II-RT

View solution in original post

15 REPLIES 15

Interesting. I have an r5 and it works perfectly except that i get the intermittent flash instead of the red af assist. You get the af assist beam on your r6ii? Was there a config setting you needed?

Mirrorless cameras don't use the red AF assist beam even if the flash has it, they use the intermittent flash to focus. There is no configuration on a mirrorless camera that allows the red AF assist beam to operate.


Brian
EOS specialist trainer, photographer and author
-- Note: my spell checker is set for EN-GB, not EN-US --

I am not exactly sure which ones - probably lower end - but some cameras like the R50 have only the new multi function pins, not the legacy 4 pins + MF pins like on the R8 and R6ii.

The R100, R6 Classic, R5 Classic, R (original) & RP. Have the old 5 pin hot shoe. The R50 on supports the multi function hot shoe it lacks the older 5 pins for legacy speedlite. Canon first released the 5 pin hot shoe in 1986 with the T90. The pins have remained the same but the flash metering systems changed. First was TTL then in 1986 Canon released A-TTL. In 1995 Canon released E-TTL which is the current flash metering system. In 2004 E-TTL was revised with E-TTL II. But the core E-TTL communication never changed.

-Demetrius
Bodies: EOS 5D Mark IV
Lenses: EF Trinity, EF 85mm F/1.8 USM
Retired Gear: EOS 40D, EF 50mm F/1.8 STM & EF 70-210mm F/4
Speedlites: 420EX, 470EX-AI, 550EX & 600EX II-RT

But newer cameras like the R6 mk II have *both* the pins for the MFA hot shoe and the traditional 5 pin connection for legacy flashes.

kvbarkley_0-1732044024227.jpeg

 

Yes they do. Most of the EOS R series cameras have been updated to the new shoe. The only cameras without it are the R100 & RP. The R50 doesn’t have the hybrid hot shoe like other cameras do.

-Demetrius
Bodies: EOS 5D Mark IV
Lenses: EF Trinity, EF 85mm F/1.8 USM
Retired Gear: EOS 40D, EF 50mm F/1.8 STM & EF 70-210mm F/4
Speedlites: 420EX, 470EX-AI, 550EX & 600EX II-RT

Announcements