02-05-2022 09:00 AM
Is it possible to use a 600 EXII RT as a master and a 430 EXII-RT as a slave without adding a trigger system? Will the 600 be able to control the 430?
02-05-2022 11:43 AM
Did you mean to say "430 EXIII-RT" (3rd-generation 430?) If so, the 600-series flash should be able to trigger the 430 in either radio mode or optical-line-of-sight mode. If you have the 2nd-generation 430, you'll need to use the optical mode.
02-13-2022 06:24 AM
Thank you!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.