cancel
Showing results for 
Search instead for 
Did you mean: 

Getting the 270EXII to work remotely

padmoore
Apprentice

I have set the speedlite as the slave. How do I set the camera as the master? What other settings do I need adjust in order to make the speedlite fire remotely?

3 REPLIES 3

digital
Rising Star

What camera do you have? Does it have a pop up flash? If so it needs to be up to fire your flash. By your quesiton I'm assuming there is no other flash attached to your camera - just your  270 off camera.  

 

If you don't have a pop up flash you cannot fire your 270 off camera unless you get some triggers.   

p4pictures
Enthusiast

You need to have a master flash to control your 270EX II off-camera. The master flash emits a series of coded pulses of light that tell the 270EX II what to do, how much light to give out etc.

 

All the following can work as a master flash controlling the 270EX II; Speedlite 550EX, Speedlite 580EX, Speedlite 580EX II, Speedlite 600EX-RT, Speedlite 600EX, EOS 7D, EOS 60D, EOS 600D / Rebel T3i, EOS 650D / Rebel T4i. In the case of the EOS cameras as masters you will need to pop up the flash on the camera and use the cameras menu to set either Easy Wireless flash (on the T3i / T4i) or set the pop up as a master flash on the EOS 60D / 7D.

 

You'll find some more information on my website here:

http://www.p4pictures.com/2011/03/easy-wireless-flash-on-the-new-eos-600d/

http://www.p4pictures.com/2012/10/better-looking-pictures-with-easy-wireless-flash/

 

Brian / p4pictures

Brian - Canon specialist trainer, author and photographer
https://www.p4pictures.com

Good update. I assumed the OP did not have a second flash. I should have included all three options - pop up flash (if camera has it), another flash with master capabilities or triggers.

 

To the OP.  You can get very good quality inexpensive triggers these days.  

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x