06-11-2017 02:25 PM
Basically my question is this: Has anyone been able to successfully charge a LP-E6N inside a XC10 from a mobile battery pack? If so, was the battery pack set to 9v or 12v?
The included charger's output is listed as 8.4v so it seems like 9v should do it. But....
I have a mobile battery pack (XTPower MP-10000) that can output both 9v and 12v, and when it's set to 9v it successfully powers the camera while it's on, but it doesn't charge the LP-E6N while the camera is off.
So I'm wondering if something funky is going on, such as the voltage needed to power the camera is 9v but the volted needed to charge the LP-E6N inside the camera is 12v? The last thing I want to do is set it to 12v and fry my new gadget.
11-02-2017 05:49 PM
We have not tested charging the LP-E6N inside the XC10 with a mobile battery pack. Since this is not tested or something ascribed in the manual we're not able to officially recommend attempting this.
03-02-2020 03:48 AM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.