05-28-2017 03:06 PM
HI all,
I purchased a Vixi HF G40 and was told I could use it to livestream through my computer. I can't figure out how to do it. I feel as if thegre is a menu setting that I am missing.
It doesn't work via HDMI at all (the internet says HDMI on a computer is out only, so that makes sense.
I connect via USB and have it the on/off swicth set to "camera," and windows doesn't recognize it at all.
I connect and turn it to "media" and the windows thinks its a disk drive.
Any advice would be most appreciated.
Thanks,
Jack
Solved! Go to Solution.
07-21-2018 04:03 PM
As I recall I didn't have to make any camera adjustments to get the Magewell to work.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.