10-12-2023 04:47 AM - last edited on 10-14-2023 06:28 PM by SamanthaW
XF405. I don't want Manual Exposure, I need to be able to let the camera adjust itself, then LOCK all of the exposure functions: aperture, shutter speed and gain, while leaving Auto Focus operating. So if a bright object enters the frame the picture doesn't darken. I've tried reading the manual and fiddling with assignable buttons, custom button etc, and I cannot find a way to do this.
10-12-2023 08:24 AM
You can do this in the Manual Exposure mode using Momentary Automatic Aperture. Having a button assigned to this you press and hold the button so the camera adjusts the exposure. When you let go of the button it will stay at that exposure.
Look at page 70 of the manual..
10-16-2023 04:12 PM
Thank you for your reply. I assigned a button to Push Auto Iris, but it doesn't seem to work. Is this because I am using external recording on a ProRes monitor/recorder? If so what can I do?
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.