09-14-2024 10:17 PM - last edited on 09-24-2024 08:48 AM by Danny
Hello...
I'm looking at getting a Snapdragon X Windows 11 laptop, for the purpose of using Remote Camera Control Application to control Canon N500 PTZs.
Will the application install and run, without issue using the x86 emulation layer?
I'm assuming there isn't a native ARM version of the program.
Thanks...
JJ
Solved! Go to Solution.
10-05-2024 11:27 AM
I've been testing with an Asus PZ13 (Snapdragon Plus) and Remote Control Camera Application works just fine.
JJ
09-16-2024 07:41 PM
Hello doubleJ,
I do not have any specifics on that unfortunately. I can provide you with the stated system requirements for the application software however.
OS : Windows 11, Windows 10 64-bit CPU : Intel Core i7-8700 or greater Memory : 8 GB or more Display : Resolution 1920×1080 or greater |
09-16-2024 11:13 PM
Well, we're ordering one so I'll let you know.
JJ
10-05-2024 11:27 AM
I've been testing with an Asus PZ13 (Snapdragon Plus) and Remote Control Camera Application works just fine.
JJ
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.