07-13-2023 02:48 PM
I'm using this camera in an application that needs as much resolution as possible. Is there a way to extract RAW video from the camera at a resolution greater than 4K? I would also like to skip the encoding stage if possible, since I am using it in a low-latency application and need maximum speed. I could decode H.264/265, but I would rather skip that stage altogether since the camera will be co-mounted with an NVIDIA Jetson computer.
The specs say:
Total pixels: approx. 21.14 megapixels
Effective pixels: approx. 8.29 megapixels (3840 x 2160)
Are the extra pixels used for OIS?
07-13-2023 04:59 PM
Note that this is a user-level forum. What you're describing here is building out a custom hardware setup. You'll thus be better off finding a relevant forum that discusses building custom camera/cam hardware.
07-13-2023 05:01 PM
Ricky - I'm not asking for custom HW. My question is simply, is this a capability of the camera that is accessible to me, as a user.
07-13-2023 05:24 PM
As I mentioned, this is beyond what this forum can answer.
7/17/2025: New firmware updates are available.
EOS R6 Mark II - Version 1.6.0
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.