I have 3 new Canon CR-N500, a Canon RC-IP100. All updated.
Macbook M1 (sonoma) .
Network (Netgear) switch to connect the CR-N500s, the RC-IP100 and M1.
In the first step, the Camera Search Tool shows me CR-N500s with the same IPv4 address 192.168.100.1. With AutoIP, I was able to reach the Init page.
I have set the IP address manually.
RC-IP100 = 192.168.1.10 Subnet mask = 255.255.255.0
1 CR-N500 = 192.168.1.200 Subnet mask = 255.255.255.0
2. CR-N500 = 192.168.1.210 Subnet mask = 255.255.255.0
3. CR-N500 = 192.168.1.220 Subnet mask = 255.255.255.0
Network Mac = 192.168.1.100
The situation is that I could control the first CR-N500 with the RC-IP100, but I could not reach this page Admin Page.
I tried the config with a windows 10, and it's working. So the trouble comes from the network of the mac, but i don't know how to fix it.
Can someone help me to fix this problem ?
