02-05-2017 11:33 AM
I have a new Pro 2000 printer and am just learning some things about it. It seems to go to sleep very quickly after printing. Sometimes I am making last minute adjustments on another print and the printer goes to sleep.I would like the printer to stay awake longer so that I can print several prints without it going to sleep between. The online manual for this printer is (to me) horribly inadequate. Can someone guide me in extending the awake time for this printer?
Solved! Go to Solution.
02-05-2017 01:20 PM
Hi WayneT,
To change the Sleep setting of your imagePROGRAF PRO-2000, please follow these steps:
1. Swipe the screen and select Device Settings.
2. Select Device User Settings.
3. Select Energy saving settings.
4. Select your desired setting for Auto Power.
02-05-2017 01:20 PM
Hi WayneT,
To change the Sleep setting of your imagePROGRAF PRO-2000, please follow these steps:
1. Swipe the screen and select Device Settings.
2. Select Device User Settings.
3. Select Energy saving settings.
4. Select your desired setting for Auto Power.
02-06-2017 11:47 AM
Thanks, Patrick. I will have to get used to using the printer screen.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.