10-28-2013 06:10 AM
Hi
I have a new (8 weeks )printer, but sometimes it will print a partial photo then eject the paper, the amount it prints varies from print to print and it sometimes completes the print.
Any pointers would be appreciated Thanks
jereve
Solved! Go to Solution.
10-28-2013 11:40 AM
Completely remove the printer driver. You may need to get one of the free utilities to get totally rid of it. I believe Canon has one on their web site.
Reinstall the driver with the printer unconnected. After the driver installs connect the printer, or when you are instructed to do so.
10-28-2013 12:32 PM
Hi,
Many thanks for your help, I've done what you suggested and my first attempt printed out ok. i will try a few over the next few days and see how it goes.
10-28-2013 10:01 AM
Remember the printer only does what it is told to do.
It would be helpful to know all the particulars of your equipment, OS, post program. How it connected, etc. The more the better.
10-28-2013 11:07 AM
Hi,
Sure, I'm using windows 7 on a Dell laptop and the software is Elements 11 and Lightroom 5.2. The printer is connected direct with a USB cable. Of the two photos I have tried to print last night, one printed approx half an A4 sheet, and the other only managed about 1.5 inches. On both occasions the printer seemed to be working fine but suddenly ejected the paper without completing the print.
jereve
10-28-2013 11:40 AM
Completely remove the printer driver. You may need to get one of the free utilities to get totally rid of it. I believe Canon has one on their web site.
Reinstall the driver with the printer unconnected. After the driver installs connect the printer, or when you are instructed to do so.
10-28-2013 12:32 PM
Hi,
Many thanks for your help, I've done what you suggested and my first attempt printed out ok. i will try a few over the next few days and see how it goes.
10-28-2013 03:03 PM
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.