01-01-2022 04:48 PM
I'm trying to print a 12" X 12" image onto A3+ paper. The image is coming out as simply grey with a small abstract color patch in the middle? I've printed the same image as a 7" X 7" image on 8" X 10" paper perfectly. Ideas what the problem is. Thanks in advance.
01-02-2022 11:21 AM
What happens if you try to print 7x7 on the A3+ paper?
01-02-2022 12:54 PM
Hi John - I've been testing some further prints and got it to work. The only difference I think I made was that I printed from a .jpg compared to the previous versions which were .tiff's . The .jpg file was 16.3 MB while the .tiff was 279 MB. Would that make a difference using a .jpg vs a .tiff or the sizes of each? Thanks.
01-02-2022 01:28 PM
JPEG file size by itself won't make a difference but attributes attached to the file might. I can print a 184KB JPEG on A3+. Check all the printer settings in your application..
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.