11-03-2013 07:46 PM
This happened after down loading updtaed software.
I tried deleating the updated components and re-installing from the CD the Pro-100 came with--no luck.
The box that appearsafter I select print in Win Photo Viewer has changed.
P{rior to deleating the up dated software, I was unable to print without boarders, but not after updating? And I believe the original software had a selection for 11X14 paper?
Presently green isn't as dark as the original pix, blue seems to be lacking in the green stems of Arizona poppy pixs and the yellow is less vibrant.
Another pix I have of a mass of feeding coy fish is algee green water seems to have added a layer of green over the entire pix?
Appreciate any help restoring my printer to its past performance.
Best from tucson
Bob
11-03-2013 09:38 PM
It finally occured to me that i'm using Windows!!
Did a fast system reset from a point prior to down loading the up dated software....AND.....AND all is well again!
Prints just like it used to.
Best from Tucson
Bob
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.