05-09-2015 04:30 PM
When printing an image on my Pro-100 there appears to be a thin line with no ink. After 2 cleanings and one deep cleaning, the line is still there, but the nozzle check pattern shows no problem.
Any thoughts?
05-12-2015 10:07 AM
You may need to remove the print head and clean it. Very carefully, I might add. There are videos to show you how.
06-17-2015 04:59 AM
Hi spgfr,
Since the print head cleanings did not resolve the issue, cleaning the timing encoder film of the printer may help. To do this, please follow the steps located here. If you still experience difficulty, please call or email us using one of the methods on the Contact Us page for further assistance.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.