02-04-2020 08:16 PM
Hey all,
So I've run nozzle checks, did print head alignment (not really sure what to do with the one that gives me + and - numbers) and whenever I print one of my greeting cards, the color is muted. Even black prints as a dull dark brown color. Can someone help me? I've spent hours trying to figure this out.
Thanks!
02-05-2020 06:10 PM
Hi mandamoozer.
To help narrow down possible causes of the poor print quality, please provide a picture of your nozzle check results. To perform a nozzle check, hold down the RESUME/CANCEL button until the POWER lamp flashes white twice, then release it immediately.
02-15-2020 10:14 AM
Hi Darius,
Here is the nozzle test. It has no white lines or anything unless I'm missing something??
02-05-2020 06:50 PM
What paper are you using? Is it a photo product with ICC profiles? Uncoated cardstock is not going to print well since paper absorbs into the stock.
If you are doing automatic print head alignment you don't need to do anything other than execute. If you are doing manula head alignment the driver tells you what to do.
02-15-2020 01:11 PM
02-16-2020 07:31 PM
Photos print beautifully. I bought this printer because reviews said it would be good for greeting cards but maybe it can't handle matte white cardstock...?
02-16-2020 07:45 PM
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.