cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA Pro 10 shows 2 printer queues after installation

lawrence
Contributor

I have just installed my newly bought PIXMA Pro 10 printer.   

 

I  installed USB direct print mode first, and then I also installed the wireless print option.   Now I see 2 printer queues with similar names .. "Canon Pro 10 series", and "Canon Pro 10 series 2".  

 

While I am only using the wireless option now, it seems only the 2nd queue is selectable, while the first one has a grey-round symbol preceeding it,  it somehow also says off line.

 

Does the first queue represents the USB linkage and is offline while the 2nd queue represents wireless connection is workable?  Or was it an installation error?

casual than casual
2 REPLIES 2

ebiggs1
Legend

"Does the first queue represents the USB linkage and is offline while the 2nd queue represents wireless connection is workable?  Or was it an installation error?"

 

 

Yes and yes!   It won't hurt but you should decide which you want to use and stick with it.

EB
EOS 1DX and 1D Mk IV and several lenses!

okay, thanks...

casual than casual
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.